9 - 60 V
0 - 60 V
5 A
Input:
Outputs:
Current:
Package:
Eighth-brick
Technical Specification
MECHANICALꢀDIAGRAM
0.99 (25)
0.600 (15.24)
0.450 (11.43)
0.300 (7.62)
0.150 (3.81)
0.500 ±0.025
(12 ±0.63)
Overall height
8 7 6 5 4
2.39
(60.6)
2.00
(50.8)
Side View
Top View
0.145
(3.68)
0.18
(4.6)
1 2 3
(4.9)
0.19
0.020 ±0.010
(0.51 ±0.25)
(7.62)
0.300
0.600
Bottom side
Clearance
(15.24)
NOTES
PIN DESIGNATIONS
1) Pins 1-3, 5-7 are 0.040" (1.02 mm) diameter. with 0.080"
(2.03mm) diameter standoff shoulders.
2) Pins 4 and 8 are 0.062” (1.57 mm) diameter with 0.100"
(2.54 mm) diameter standoff shoulders.
3) Other pin extension lengths available. Recommended pin length
is 0.03" (0.76 mm) greater than the PCB thickness.
4) All Pins: Material - Copper Alloy
Finish - Matte Tin over Nickel plate
Pin No. Name Function
1
Vin(+) Positive input voltage
TTL input to turn converter on and off,
referenced to Vin(-), with internal pull up
2
ON/OFF
Vin(-)
Negative input voltage, internal short to
Pin 4
3
4
5) Undimensioned components are shown for visual reference only.
Negative output voltage, internal short
to Pin 3
6) All dimensions in inches (mm)
Tolerances: x.xx ±0.02" (x.x ±0.5 mm)
x.xxx ±0.010” (x.xx ±0.25 mm)
7) Weight: 1.7 oz (48 g) typical
8) Workmanship: Meets or exceeds IPC-A-610C Class II
Vout(-)
1
SENSE(-) Negative remote sense (S option)
5
6
7
ITRIM
Current limit trim (C option)
VTRIM
Output voltage trim
2
SENSE(+) Positive remote sense (S option)
IMON
Current monitor output (C option)
8
Vout(+) Positive output voltage
Notes:
1. SENSE(–) should be connected to Vout(–) either remotely or at the converter.
2. SENSE(+) should be connected to Vout(+) either remotely or at the converter.
Product # NQ60x60EGC05
Phone 1-888-567-9596
www.synqor.com
Doc.# 005-NG6060W Rev. C
03/06/09
Page 2
SYNQOR [ SYNQOR WORLDWIDE HEADQUARTERS ]
