欢迎访问ic37.com |
会员登录 免费注册
发布采购

SM39R08A5W10MP 参数 Datasheet PDF下载

SM39R08A5W10MP图片预览
型号: SM39R08A5W10MP
PDF下载: 下载PDF文件 查看货源
内容描述: SM39R08A5\n8位微控制器\n具有8KB闪存\n和256B RAM的嵌入式 [SM39R08A5 8-Bit Micro-controller with 8KB Flash & 256B RAM embedded]
分类和应用: 闪存微控制器
文件页数/大小: 56 页 / 2316 K
品牌: SYNCMOS [ SYNCMOS TECHNOLOGIES,INC ]
 浏览型号SM39R08A5W10MP的Datasheet PDF文件第40页浏览型号SM39R08A5W10MP的Datasheet PDF文件第41页浏览型号SM39R08A5W10MP的Datasheet PDF文件第42页浏览型号SM39R08A5W10MP的Datasheet PDF文件第43页浏览型号SM39R08A5W10MP的Datasheet PDF文件第45页浏览型号SM39R08A5W10MP的Datasheet PDF文件第46页浏览型号SM39R08A5W10MP的Datasheet PDF文件第47页浏览型号SM39R08A5W10MP的Datasheet PDF文件第48页  
SM39R08A5  
8-Bit Micro-controller  
with 8KB Flash  
& 256B RAM embedded  
Mnemonic: IICA1  
Address: FAH  
7
6
5
4
3
2
1
0
Reset  
IICA1[7:1]  
R/W  
Match1 or RW1  
R or R/W  
A0H  
Slave mode:  
IICA1[7:1]: IIC Address registers  
This is the first 7-bit address for this slave module. It will be checked when an address (from  
master) is received  
Match1: When IICA1 matches with the received address from the master side, this bit will set to 1 by  
hardware. When IIC bus gets or send first data, this bit will clear automatically.  
Master mode:  
IICA1[7:1]: IIC Address registers  
This 7-bit address indicates the slave with which it wants to communicate.  
RW1: This bit will be sent out as RW of the slave side if the module has set the MStart or RStart bit. It  
appears at the 8th bit after the IIC address as shown in Fig. 14-2. It is used to tell the salve the  
direction of the following communication. If it is 1, the module is in master receive mode. If 0, the  
module is in master transmit mode.  
Fig. 11-2: RW bit in the 8th bit after IIC address  
Address: FBh  
Mnemonic: IICA2  
7
6
5
4
3
2
1
0
Reset  
60h  
IICA2[7:1]  
R/W  
Match2 or RW2  
R or R/W  
Slave mode:  
IICA2[7:1]: IIC Address registers  
This is the second 7-bit address for this slave module.  
It will be checked when an address (from master) is received  
Match2: When IICA2 matches with the received address from the master side, this bit will set to 1 by  
hardware. When IIC bus gets or send first data, this bit will clear automatically.  
Master mode:  
IICA2[7:1]: IIC Address registers  
This 7-bit address indicates the slave with which it wants to communicate.  
RW2: This bit will be sent out as RW of the slave side if the module has set the MStart or RStart bit. It is  
used to tell the salve the direction of the following communication. If it is 1, the module is in  
master receive mode. If 0, the module is in master transmit mode.  
Specifications subject to change without notice contact your sales representatives for the most recent information.  
ISSFD-M067  
Ver B SM39R08A5 04/22/2013  
- 44 -