STM8S207xx, STM8S208xx
Revision history
14
Revision history
Table 58. Document revision history
Date
Revision
Changes
23-May-2008
1
Initial release.
Added part numbers on page 1 and in Table 2 on page 11.
Updated Section 4: Product overview.
05-Jun-2008
22-Jun-2008
2
3
Updated Section 10: Electrical characteristics.
Added part numbers on page 1 and in Table 2 on page 11.
Added 32 pin device pinout and ordering information.
Updated UBC option description in Table 13 on page 48.
USART renamed UART1, LINUART renamed UART3.
Max. ADC frequency increased to 6 MHz.
12-Aug-2008
4
Removed STM8S207K4 part number.
Removed LQFP64 14 x 14 mm package.
Added medium and high density Flash memory categories.
Added Section 6: Memory and register map on page 33.
Replaced beCAN3 by beCAN in Section 4.14.5: beCAN.
Updated Section 10: Electrical characteristics on page 52.
20-Oct-2008
5
Updated LQFP44 (Figure 47 and Table 55), and LQFP32 outline and
mechanical data (Figure 48, and Table 56).
Changed VDD minimum value from 3.0 to 2.95 V.
Updated number of High Sink I/Os in pinout.
08-Dec-2008
30-Jan-2009
6
7
Removed FLASH _NFPR and FLASH _FPR registers in Table 9:
General hardware register map.
Removed preliminary status.
Removed VQFN32 package.
Added STM8S207C6, STM8S207S6.
Updated external interrupts in Table 2 on page 11.
Updated Section 10: Electrical characteristics.
Document status changed from “preliminary data” to “datasheet”.
Added LQFP64 14 x 14 mm package.
Added STM8S207M8, STM8S207SB, STM8S208R8, STM8S208R6,
STM8S208C8, and STM8S208C6, STM8S208SB, STM8S208S8,
and STM8S208S6.
Replaced “CAN” with “beCAN”.
Added Table 3 to Section 4.5: Clock controller.
Updated Section 4.8: Auto wakeup counter.
10-Jul-2009
8
Added beCAN peripheral (impacting Table 1 and Figure 6).
Added footnote about CAN_RX/TX to pinout figures 3, 4, and 6.
Table 6: Removed ‘X’ from wpu column of I2C pins (no wpu
available).
Added Table 11: Interrupt mapping.
Doc ID 14733 Rev 9
101/103
STMICROELECTRONICS [ ST ]
