STM8S003K3 STM8S003F3
Electrical characteristics
9.3.2
Supply current characteristics
The current consumption is measured as described in Pin input voltage.
9.3.2.1
Total current consumption in run mode
The MCU is placed under the following conditions:
All I/O pins in input mode with a static value at VDD or VSS (no load)
•
All peripherals are disabled (clock stopped by peripheral clock gating registers) except if
explicitly mentioned.
•
Subject to general operating conditions for VDD and TA.
Table 20: Total current consumption with code execution in run mode at VDD = 5 V
Max(1)
Symbol
Parameter
Conditions
Typ
2.3
Unit
HSE crystal osc. (16 MHz)
HSE user ext. clock (16 MHz) 2
HSI RC osc. (16 MHz) 1.7
fCPU = fMASTER
16 MHz
=
2.35
2
fCPU = fMASTER/128 = HSE user ext. clock (16 MHz) 0.86
125 kHz
Supply current
in run mode,
code executed
from RAM
HSI RC osc. (16 MHz)
0.7
0.87
0.58
fCPU = fMASTER/128 =
15.625 kHz
IDD(RUN)
HSI RC osc. (16 MHz/8)
0.46
mA
fCPU = fMASTER
128 kHz
=
=
=
LSI RC osc. (128 kHz)
0.41
4.5
0.55
HSE crystal osc. (16 MHz)
Supply current
in run mode,
code executed
from Flash
fCPU = fMASTER
16 MHz
HSE user ext. clock (16 MHz) 4.3
4.75
4.5
HSI RC osc. (16 MHz)
3.7
fCPU = fMASTER
2 MHz
HSI RC osc. (16 MHz/8)(2)
0.84
1.05
0.9
fCPU = fMASTER/128 =
125 kHz
HSI RC osc. (16 MHz)
HSI RC osc. (16 MHz/8)
LSI RC osc. (128 kHz)
0.72
0.46
0.42
Supply current
in run mode,
code executed
from Flash
IDD(RUN)
mA
fCPU = fMASTER/128 =
15.625 kHz
0.58
0.57
fCPU = fMASTER
128 kHz
=
DocID018576 Rev 2
51/99