Electrical characteristics
STM32F103xC, STM32F103xD, STM32F103xE
Table 46. Output voltage characteristics
Symbol
Parameter
Conditions
Min
Max
Unit
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
(1)
VOL
0.4
TTL port
IIO = +8 mA
V
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
(2)
2.7 V < VDD < 3.6 V
VOH
VDD–0.4
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
(1)
VOL
0.4
1.3
0.4
CMOS port
IIO =+ 8mA
V
V
V
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
(2)
2.7 V < VDD < 3.6 V
VOH
2.4
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
(1)(3)
VOL
IIO = +20 mA
2.7 V < VDD < 3.6 V
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
(2)(3)
VOH
VDD–1.3
Output low level voltage for an I/O pin
when 8 pins are sunk at same time
(1)(3)
VOL
IIO = +6 mA
2 V < VDD < 2.7 V
Output high level voltage for an I/O pin
when 8 pins are sourced at same time
(2)(3)
VOH
VDD–0.4
1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 8
and the sum of IIO (I/O ports and control pins) must not exceed IVSS
.
2. The IIO current sourced by the device must always respect the absolute maximum rating specified in
Table 8 and the sum of IIO (I/O ports and control pins) must not exceed IVDD
.
3. Based on characterization data, not tested in production.
84/123
Doc ID 14611 Rev 7
STMICROELECTRONICS [ ST ]
