Taping and Reel Specifications
FK□1105W-TR/-RR
(acc.to JIS-C0806-03）
【Appearance】
Note
-TR : Cathode side of LEDs should be located
on the sprocket-hole side and Lens should be located
on cover-tape side.
-RR : Cathode side of LEDs should be located
on the sprocket-hole side and PCB should be located
on cover-tape side.
Items
Cover-tape
Carrier-tape
Specifications
Remarks
Cover-tape shall be longer
The end of cover-tape shall be
than 200mm without carrier-tape
held with adhesive tape.
Leader area
Empty pocket shall be more than
10 pieces.
Please refer to the above figure
for Taping & reel orientation .
Empty pocket shall be more than
15 pieces.
The end of taping shall be
Trailer area
inserted into a slit of the hub.
Page : 15
2014/6/20
STANLEY [ STANLEY ELECTRIC CO.,LTD. ]
