16 Mbit (x8/x16) Concurrent SuperFlash
SST36VF1601E / SST36VF1602E
SST36VF1601E / 1602E16Mb (x8/x16) Concurrent SuperFlash
Data Sheet
FEATURES:
•
•
Organized as 1M x16 or 2M x8
Dual Bank Architecture for Concurrent
Read/Write Operation
– 16 Mbit Bottom Sector Protection
- SST36VF1601E: 12 Mbit + 4 Mbit
– 16 Mbit Top Sector Protection
- SST36VF1602E: 4 Mbit + 12 Mbit
Single 2.7-3.6V for Read and Write Operations
Superior Reliability
•
Block-Erase Capability
– Uniform 32 KWord blocks
Erase-Suspend / Erase-Resume Capabilities
Security ID Feature
– SST: 128 bits
– User: 128 bits
•
•
•
Fast Read Access Time
– 70 ns
Latched Address and Data
Fast Erase and Program (typical):
•
•
•
•
– Endurance: 100,000 cycles (typical)
– Greater than 100 years Data Retention
– Sector-Erase Time: 18 ms
– Block-Erase Time: 18 ms
– Chip-Erase Time: 35 ms
– Program Time: 7 µs
Automatic Write Timing
– Internal VPP Generation
End-of-Write Detection
– Toggle Bit
– Data# Polling
– Ready/Busy# pin
CMOS I/O Compatibility
Conforms to Common Flash Memory Interface (CFI)
JEDEC Standards
•
•
•
Low Power Consumption:
– Active Current: 6 mA typical
– Standby Current: 4 µA typical
– Auto Low Power Mode: 4 µA typical
•
•
Hardware Sector Protection/WP# Input Pin
– Protects the 4 outermost sectors (8 KWord)
in the larger bank by driving WP# low and
unprotects by driving WP# high
Hardware Reset Pin (RST#)
– Resets the internal state machine to reading
array data
•
•
•
•
•
•
Byte# Pin
– Selects 8-bit or 16-bit mode
Sector-Erase Capability
– Uniform 2 KWord sectors
Chip-Erase Capability
– Flash EEPROM Pinouts and command sets
Packages Available
– 48-ball TFBGA (6mm x 8mm)
– 48-lead TSOP (12mm x 20mm)
•
•
All non-Pb (lead-free) devices are RoHS compliant
PRODUCT DESCRIPTION
The SST36VF1601E and SST36VF1602E are 1M x16 or
2M x8 CMOS Concurrent Read/Write Flash Memory man-
ufactured with SST’s proprietary, high performance CMOS
SuperFlash memory technology. The split-gate cell design
and thick oxide tunneling injector attain better reliability and
manufacturability compared with alternate approaches.
The devices write (Program or Erase) with a 2.7-3.6V
power supply and conform to JEDEC standard pinouts for
x8/x16 memories.
and tested for a wide spectrum of applications, these
devices are offered with a guaranteed endurance of 10,000
cycles. Data retention is rated at greater than 100 years.
These devices are suited for applications that require con-
venient and economical updating of program, configura-
tion, or data memory. For all system applications, the
devices significantly improve performance and reliability,
while lowering power consumption. Since for any given
voltage range, the SuperFlash technology uses less cur-
rent to program and has a shorter erase time, the total
energy consumed during any Erase or Program operation
is less than alternative flash technologies. These devices
also improve flexibility while lowering the cost for program,
data, and configuration storage applications.
Featuring high performance Program, these devices pro-
vide a typical Program time of 7 µsec and use the Toggle
Bit, Data# Polling, or RY/BY# to detect the completion of
the Program or Erase operation. To protect against inad-
vertent write, the devices have on-chip hardware and Soft-
ware Data Protection schemes. Designed, manufactured,
©2005 Silicon Storage Technology, Inc.
The SST logo and SuperFlash are registered trademarks of Silicon Storage Technology, Inc.
CSF is a trademark of Silicon Storage Technology, Inc.
S71274-03-000
1
11/05
These specifications are subject to change without notice.