Da ta
Shee t
(Prelimi nar y)
12. Appendix
This section contains information relating to software control or interfacing with the Flash device. For
additional information and assistance regarding software, see
www.spansion.com.
12.1
Command Definitions
Writing specific address and data commands or sequences into the command register initiates device
operations. Tables
define the valid register command sequences.
Writing incorrect address and
data values or writing them in the improper sequence can place the device in an unknown state.
A reset
command is then required to return the device to reading array data.
November 8, 2007 S29GL-P_00_A7
S29GL-P MirrorBit
®
Flash Family
67