ILX137K
5. Specifies at the minimum value of the saturation output voltage.
6. SEmin is the exposure at the minimum value (1V) of the saturation output voltage.
7. Saturation exposure is defined as in the following figure for each color.
SE = V
SAT
/R
8. For each color, Main Line is defined by the difference between the average value of D2 to D64 dummy
signal during no incident light and of D66 to D82, S1 to S700. Sub Line is defined by the difference
between the average value of D2' to D64' dummy signal during no incident light and of D66' to D82', S1' to
S10700'. Optical signal integration time
τ
int stands at 20ms.
9. For each color, calculate the difference as follows; the maximum and minimum values of the dark output
voltage of respective Main Line and Sub Line; the dark voltage average value of respective Main Line and
Sub Line. Then, the highest value is defined as dark signal nonuniformity. Optical signal integration time
τ
int
stands at 20ms.
10. V
OUT
= 500mV (Typ.)
11. Vos is defined as the output DC value when
φRS
is high.
12. For each color, the Main Line offset level of the optical black pixel is defined as Vos-main, the Sub Line
offset level, Vos-sub. Then, the offset level difference is defined as indicated below.
∆Vos
= | Vos-main – Vos-sub |
∆Vos
–5–
SONY [ SONY CORPORATION ]
