CXA2094Q
Description of Mode Control
Priority ranking: M1 > TVSW/EXT > (NRSW & FOMO & SAPC)
Mode control
SAPC = 0
SAPC = 1
“Select dbx input and TV decoder output”
“Select dbx input and TV decoder output”
Conditions: FOMO = 0
Conditions: FOMO = 0
NRSW = 0 (MONO or ST output)
NRSW = 0 (MONO or ST output)
As on the left
• During ST input: left channel: L,
right channel: R
• During other input: left channel: L + R,
right channel: L + R
NRSW
NRSW = 1 (SAP output)
NRSW = 1 (SAP output)
• Regardless of the presence of SAP
discrimination,
• When there is “SAP” during SAP
discrimination
dbx input: “SAP”
– left channel: SAP, right channel: SAP
• When there is “No SAP”, output is the
same as when NRSW = 0.
left channel: SAP, right channel: SAP
However, when there is no SAP, SAPOUT
output is soft muted (–7dB)
“Forced MONO”
FOMO = 1
FOMO
• During SAP output: left channel: L + R, right channel: SAP
• During ST or MONO output: left channel: L + R, right channel: L + R
Change the selection conditions for “MONO or ST output” and “SAP output”.
SAPC = 0: Switch to SAP output when there is SAP discrimination.
Do not switch to SAP output when there is no SAP discrimination.
SAPC = 1: Switch to SAP output regardless of whether there is SAP discrimination.
SAPC
M1
“MUTE”
M1 = 0: TVOUT-L, R, S output is muted.
“TV mode/external input mode selection”
TVSW = 0: Set TVOUT-L, R output to TV mode.
TVSW/EXT
TVSW = 1: Set TVOUT-L, R output to external input mode.
EXT = 0: Set TVOUT-L, R output to external input [1] mode. (TVSW = 1)
EXT = 1: Set TVOUT-L, R output to external input [2] mode. (TVSW = 1)
– 23 –