CXA2013M
Description of Control Registers
TEST (1) : DAC test mode for VCA and checking Cue BPF mode.
Use only for the electrical characteristics inspection process of IC.
0 = Normal mode
1 = Test mode, the Cue signal component through Cue BPF to TV OUT-L.
Output DAC voltage for VCA to TV OUT-R.
ATT (7) :
Perform the separation adjustment by varying the signal level input to MPX IN (Pin 5).
Variable range of the input signal: Normal input level ±3.0dB
0 = Level Min.
34 = Center
7F = Level Max.
EXT (1) :
Select TV mode or external input mode for LS OUT output
0 = TV mode
1 = External input mode
FOMO (1) :
Select ON/OFF forced MONO mode
0 = Forced MONO OFF
1 = Forced MONO ON
S1 (1) :
S0 (1) :
Select output signal for TV OUT, LS OUT
Select output signal for TV OUT, LS OUT
MUTE TV (1) : Mute TV OUT output
0 = Mute ON
1 = Mute OFF
MUTE LS (1) : Mute LS OUT output
0 = Mute ON
1 = Mute OFF
BASS (5) :
LS OUT output bass control
0 = Bass Min.
10 = Bass Center (0dB)
1F = Bass Max.
TREBLE (5) :
LS OUT output treble contorl
0 = Treble Min.
10 = Treble Center (0dB)
1F = Treble Max.
VOL (8) :
BAL (6) :
LS OUT output signal level control
0 = Volume Min. (–90dB Typ.)
FF = Volume Max. (0dB)
LS OUT-L, R output signal level (balance) control
0 = Lch Min., Rch Max.
20 = Center (Lch 0dB, Rch 0dB)
3F = Lch Max., Rch Min.
– 14 –
SONY [ SONY CORPORATION ]
