SN8F2250B Series
USB 2.0 Full-Speed 8-Bit Micro-Controller
4.4 SYSTEM HIGH CLOCK
The system high clock is from the in circuit PLL. User must select the external oscillator 6MHz X’tal, 12MHz X’tal or
16MHz X’tal by the code option “Ext_OSC”, and the entire three clock source will input to the on-chip PLL circuit. PLL
will output 12MHz to system clock (Fosc).
4.4.1 EXTERNAL HIGH CLOCK
External high clock includes three modules (Crystal and external clock signal). The start up time of crystal and ceramic
oscillator is different. The oscillator start-up time decides reset time length.
SONiX TECHNOLOGY CO., LTD
Page 48
Version 1.1
SONIX [ SONIX TECHNOLOGY COMPANY ]
