High Performance Two Port 10/100 Managed Ethernet Switch with 32-Bit Non-PCI CPU Interface
Datasheet
14.5.3.25 Switch Engine Ingress Rate Configuration Register (SWE_INGRSS_RATE_CFG)
Register #:
184Ah
Size:
32 bits
This register, along with the settings accessible via the Switch Engine Ingress Rate Command Register
(SWE_INGRSS_RATE_CMD), is used to configure the ingress rate metering/coloring.
BITS
DESCRIPTION
TYPE
DEFAULT
31:3
2:1
RESERVED
Rate Mode
RO
-
R/W
00b
These bits configure the rate metering/coloring mode.
00 = Source Port & Priority
01 = Source Port Only
10 = Priority Only
11 = RESERVED
0
Ingress Rate Enable
When set, ingress rates are metered and packets are colored and dropped
if necessary.
R/W
0b
Revision 1.2 (04-08-08)
394
SMSC LAN9312
DATASHEET
SMSC [ SMSC CORPORATION ]
