Non-PCI Single-Chip Full Duplex Ethernet Controller with Magic Packet
PIN NO.
TQFP
QFP
PIN NAME
GND
TYPE
DESCRIPTION
100,6,
22,29
2,8,18,
Ground pins.
24,31,
56,66,
94
54,64,92,
16
78,86
87
80,88,89 AGND
Analog ground pins.
4.1
Buffer Symbols
O4
Output buffer with 2mA source and 4mA sink at 5V.
Output buffer with 1mA source and 2mA sink at 3.3V
I/O4 Output buffer with 2mA source and 4mA sink at 5V.
Output buffer with 1mA source and 2mA sink at 3.3V.
O162 Output buffer with 2mA source and 16mA sink at 5V.
Output buffer with 1mA source and 8mA sink at 3.3V.
O24 Output buffer with 12mA source and 24mA sink at 5V.
Output buffer with 6mA source and 12mA sink at 3.3V.
OD16 Open drain buffer with 16mA sink at 5V.
Open drain buffer with 8mA sink at 3.3V.
OD24 Open drain buffer with 24mA sink at 5V.
Open drain buffer with 12mA sink at 3.3V.
I/O24 Bi-directional buffer with 12mA source and 24mA sink at 5V.
Bi-directional buffer with 6mA source and 16mA sink at 3.3V.
I
Input buffer with TTL levels.
IS
Iclk
**
Input buffer with Schmitt Trigger Hysteresis.
Clock input buffer.
Signal is 5.0V input tolerant when Vcc=3.3V. For Revision E and later.
DC levels and conditions defined in the DC Electrical Characteristics section.
Rev. 09/10/2004
Page 20
SMSC LAN91C965v&3v
DATASHEET
SMSC [ SMSC CORPORATION ]
