欢迎访问ic37.com |
会员登录 免费注册
发布采购

LAN91C96-MU 参数 Datasheet PDF下载

LAN91C96-MU图片预览
型号: LAN91C96-MU
PDF下载: 下载PDF文件 查看货源
内容描述: 非PCI单芯片全双工以太网控制器魔包 [Non-PCI Single-Chip Full Duplex Ethernet Controller with Magic Packet]
分类和应用: 控制器PC以太网
文件页数/大小: 125 页 / 776 K
品牌: SMSC [ SMSC CORPORATION ]
 浏览型号LAN91C96-MU的Datasheet PDF文件第14页浏览型号LAN91C96-MU的Datasheet PDF文件第15页浏览型号LAN91C96-MU的Datasheet PDF文件第16页浏览型号LAN91C96-MU的Datasheet PDF文件第17页浏览型号LAN91C96-MU的Datasheet PDF文件第19页浏览型号LAN91C96-MU的Datasheet PDF文件第20页浏览型号LAN91C96-MU的Datasheet PDF文件第21页浏览型号LAN91C96-MU的Datasheet PDF文件第22页  
Non-PCI Single-Chip Full Duplex Ethernet Controller with Magic Packet  
PIN NO.  
TQFP  
QFP  
52  
PIN NAME  
nIOWR/  
R/nW  
TYPE  
DESCRIPTION  
50  
51  
5
IS with  
LOCAL BUS, PCMCIA - Input. Active low write strobe  
pullup  
used to access the LAN91C96 IO space.  
**  
68000 – Read/nWrite strobe to read from or write to  
the chip.  
53  
7
nMEMR/  
nOE  
IS with  
pullup  
**  
LOCAL BUS - Active low signal used by the host  
processor to read from the external ROM.  
PCMCIA - Output Enable input used to read from the  
COR, CSR and attribute memory.  
Output. 4usec clock used to shift data in and out of a  
EESK  
O4  
serial EEPROM.  
4
2
6
4
EECS  
EEDO/  
SDOUT  
EEDI  
O4  
O4  
Output. Serial EEPROM chip select.  
Output. Connected to the DI input of the serial  
EEPROM.  
3
5
I with  
Input. Connected to the DO output of the serial  
pull-down EEPROM.  
**  
96,97  
99  
98,99  
1
IOS0-1  
IOS2  
I with  
Input. External switches can be connected to these  
pullup  
lines to select between predefined EEPROM  
configurations. The values of these pins are readable.  
I with  
Input. External switches can be connected to these  
pullup  
lines to select between predefined EEPROM  
configurations. The values of these pins are readable.  
**  
70  
67  
72  
69  
nTXLED/  
nTXEN  
OD16  
INTERNAL ENDEC - Transmit LED output.  
O162  
OD16  
EXTERNAL ENDEC - Active low Transmit Enable  
output.  
nBSELED/  
RXD  
INTERNAL ENDEC - Board Select LED activated by  
accesses to I/O space (nIORD or nIOWR active with  
AEN low and valid address decode for LOCAL BUS,  
and with nREG low and COR0 high for PCMCIA). The  
pulse is stretched beyond the access duration to make  
the LED visible.  
I with  
EXTERNAL ENDEC - NRZ receive data input.  
pullup  
69  
71  
nRXLED/  
RXCLK  
OD16  
INTERNAL ENDEC - Receive LED output.  
I with  
EXTERNAL ENDEC - Receive clock input.  
INTERNAL ENDEC - Link LED output.  
pullup  
68  
1
70  
3
nLNKLED/  
TXD  
OD16  
O162  
EXTERNAL ENDEC - Transmit Data output.  
ENEEP  
I with  
Input. This active high input enables the EEPROM to  
be read or written by the LAN91C96. Internally pulled  
up. Must be connected to ground if no serial EEPROM  
is used.  
pullup  
**  
Rev. 09/10/2004  
Page 18  
SMSC LAN91C965v&3v  
DATASHEET  
 复制成功!