Multiple Channel 1°C Temperature Sensor with Beta Compensation
Datasheet
Table 10.1 Customer Revision History (continued)
SECTION/FIGURE/ENTRY CORRECTION
REVISION LEVEL & DATE
Table 4.1, "Absolute
Maximum Ratings"
Updated voltage limits for 5V tolerant pins with
pull-up resistors.
Added the following note below table: “For the 5V
tolerant pins that have a pull-up resistor (SMCLK,
SMDATA, THERM, ALERT), the pull-up voltage
must not exceed 3.6V when the device is
unpowered.”
Table 4.2, "Electrical
Specifications"
Added leakage current
Rev. 1.34 (12-02-08)
Initial document creation
SMSC EMC1412
Revision 1.41 (02-23-12)
DATA4S7HEET