1°C Multiple Temperature Sensor with Beta Compensation and Hottest of Thermal Zones
Datasheet
Chapter 7 Revision History
Table 7.1 Customer Revision History
REVISION LEVEL AND
DATE
SECTION/FIGURE/ENTRY
CORRECTION
Rev. 0.69 (06-29-09)
Table 1.1, "EMC1046/EMC1047 Pin
Description"
Added “requires external pullup
resistor” to SMDATA and SMCLK in
function column
Table 1.1, "EMC1046/EMC1047 Pin
Description"
Added the following application note
below table: “For the 5V tolerant pins
that have a pull-up resistor, the voltage
difference between VDD and the pull-
up voltage must never exceed 3.6V.”
Table 2.1, "Absolute Maximum
Ratings"
Updated voltage limits for 5V tolerant
pins with pull-up resistors.
Added the following note below table:
“For the 5V tolerant pins that have a
pull-up resistor, the pull-up voltage
must not exceed 3.6V when the device
is unpowered.”
SMSC EMC1046/EMC1047
Revision 0.69 (06-29-09)
DATA3S7HEET