OPERATIONAL DESCRIPTION
MAXIMUM GUARANTEED RATINGS*
Operating Temperature Range
Storage Temperature Range
..........................................................................................
Lead Temperature Range (soldering, 10 seconds)
0oC to +70oC
-55o to +150oC
+325oC
.........................................................................................
....................................................................
Positive Voltage on any pin
Vcc+0.3V
.....................................................................................................
Negative Voltage on any pin, with respect to ground
-0.3V
...................................................................
Maximum VCC
+7V
................................................................................................................................
*Stresses above those listed above could cause permanent damage to the device. This is a stress
rating only and functional operation of the device at any other condition above those indicated in the
operation sections of this specification is not implied.
Note: When powering this device from laboratory or system power supplies, it is important that the
Absolute Maximum Ratings not be exceeded or device failure can result. Some power supplies exhibit
voltage spikes on their outputs when the AC power is switched on or off. In addition, voltage
transients on the AC power line may appear on the DC output. If this possibility exists, it is suggested
that a clamp circuit be used.
Table 8 - ELECTRICAL CHARACTERISTICS
T = 0oC to +70oC, VCC = +5.0V ± 5%
MIN TYP MAX UNITS
PARAMETER
LOW INPUT VOLTAGE
HIGH INPUT VOLTAGE
LOW OUTPUT VOLTAGE
SYMBOL
VIL
COMMENTS
0.8
V
V
V
VIH
2.0
2.4
VOL
0.4
IOL = 5.0ma D0 - D7
IOL = 3.5ma
HIGH OUTPUT VOLTAGE
INPUT LEAKAGE CURRENT
INPUT CAPACITANCE
VOH
IL
V
IOH = 100µa
±10
µA
pF
ma
CIN
ICC
10
15
POWER SUPPLY CURRENT
12
SMSC [ SMSC CORPORATION ]
