3 Channel Capacitive Touch Sensor with 3 LED Drivers
Datasheet
Chapter 2 Electrical Specifications
Table 2.1 Absolute Maximum Ratings
Voltage on 5V tolerant pins (V5VT_PIN
)
-0.3 to 5.5
0 to 3.6
V
V
V
V
W
Voltage on 5V tolerant pins (|V5VT_PIN - VDD|) Note 2.2
Voltage on VDD pin
-0.3 to 4
Voltage on any other pin to GND
-0.3 to VDD + 0.3
0.7
Package Power Dissipation up to TA = 85°C for 10 pin DFN
(see Note 2.3)
Junction to Ambient (θJA
)
77.7
°C/W
°C
Operating Ambient Temperature Range
Storage Temperature Range
-40 to 125
-55 to 150
8000
°C
ESD Rating, All Pins, HBM
V
Note 2.1 Stresses above those listed could cause permanent damage to the device. This is a stress
rating only and functional operation of the device at any other condition above those
indicated in the operation sections of this specification is not implied.
Note 2.2 For the 5V tolerant pins that have a pull-up resistor, the voltage difference between
V5VT_PIN and VDD must never exceed 3.6V.
Note 2.3 The Package Power Dissipation specification assumes a recommended thermal via design
consisting of a 2x2 matrix of 0.3mm (12mil) vias at 1.0mm pitch connected to the ground
plane with a 1.6 x 2.3mm thermal landing.
Table 2.2 Electrical Specifications
VDD = 3V to 3.6V, TA = 0°C to 85°C, all Typical values at TA = 27°C unless otherwise noted.
CHARACTERISTIC
SYMBOL
MIN
TYP
MAX
UNIT
CONDITIONS
DC Power
3.3
Supply Voltage
VDD
3.0
3.6
V
Revision 1.32 (01-05-12)
SMSC CAP1133
DATA1S0HEET