CAP1066
6 Channel Capacitive Touch
Sensor with 6 LED Drivers
PRODUCT FEATURES
General Description
The CAP1066 is a multiple channel Capacitive Touch
sensor with multiple power LED drivers. It contains six
(6) individual Capacitive Touch sensor inputs with
programmable sensitivity for use in touch sensor
applications. Each sensor automatically recalibrates to
compensate for gradual environmental changes.
The CAP1066 also contains six (6) LED drivers that
offer full-on / off, variable rate blinking, dimness controls,
and breathing. Each of the LED drivers may be linked to
one of the sensors to be actuated when a touch is
detected. As well, each LED driver may be individually
controlled via a host controller.
The CAP1066 offers multiple power states operating at
low quiescent currents.
During the Standby mode of operation, one or more
Capacitive Touch Sensors are active and all LEDs may
be used. If a touch is detected, then it will wake the
system using the WAKE/SPI_MOSI pin.
The Deep Sleep mode of operation is the lowest power
state available drawing 3uA of current. During this
mode, no sensors are activethough all LEDs may be
u s e d . D r i v i n g t h e WA K E / S P I _ M O S I p i n o r
communications will wake the device.
Datasheet
Applications
Desktop and Notebook PC’s
LCD Monitors
Printers
Appliances
Features
Six (6) Capacitive Touch Sensor Inputs
— Programmable sensitivity
— Automatic recalibration
— Individual thresholds for each button
Flexible Capacitive Touch Sense algorithm
Multiple Communication interfaces
—
—
—
—
SMBus / I
2
C compliant interface
SMSC BC-Link interface
SPI communications
Pin selectable communications protocol and multiple
slave addresses (SMBus / I
2
C only)
Low Power operation
— 3uA quiescent current in Deep Sleep
— Samples one or more channels in Standby
Six (6) LED Driver Outputs
— Open Drain or Push-Pull
— Programmable blink, breathe, and dimness controls
— Can be linked to Capacitive Touch Sensors
Dedicated Wake output flags touches in low power
mode
System RESET pin
Available in 20-pin 4mm x 4mm RoHS compliant
QFN package
Block Diagram
LED1 LED2 LED3
RESET
VDD GND
WAKE / SPI_MOSI
SPI_CS#
SMCLK / BC_CLK /
SPI_CLK
SMDATA BC_DATA /
SPI_MSIO/ SPI_MISO
ALERT# / BC_IRQ#
ADDR_COMM
LED Driver, Breathe,
and Dimness control
Capacitive Sensing Algorithm
SMBus /
BC-Link
or SPI
Slave
Protocol
LED4 LED5 LED6
2
CS1
CS2
CS3
CS4
CS5
CS6
Note:
I C is a trademark of NXP semiconductor. BC-Link is a trademark of SMSC.
SMSC CAP1066
DATASHEET
Revision 1.1 (08-05-09)
SMSC [ SMSC CORPORATION ]
