CINT1275
275W Single Output
Industrial Series
EMI/EMC Compliance
EN55011/22 Class B, FCC Part 15, Subpart B, Class B
Conducted Emissions
EN55011/22 Class A, FCC Part 15, Subpart B, Class A w/6db margin
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
Radiated Emissions
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Harmonic Emissions
Flicker Test
EN61000-4-8, 3A/m
EN61000-4-11, 100%, 10ms; 30%, 275ms; 60%, 100ms; Performance
Criteria A, A, & A at 70% load.
EN61000-3-2, Class A, B, C, & D
EN61000-3-3, Complies (dmax<6%)
Mechanical Drawing
Airflow Direction
Notes: 1. All dimensions in inches (mm), tolerance is +/-0.02”.
2. Mounting holes should be grounded for EMI purposes.
3. FG is safety ground connection.
4. The power supply requires mounting on metal standoffs 0.20” (5mm) in height, min.
Connector Information
DC Output
Connector
Fan Output
Connector
Input Connector
Ground
Signal Connector
PIN 1) Remote Sense (+)
PIN 2) Common
PIN 3) Remote Sense (-)
PIN 4) Current Share
PIN 5) Inhibit
Pin 6) Common
Pin 7) Power Good
Pin 8) +5Vsb
PIN 1) AC LINE
PIN 2) EMPTY
PIN 3) AC NEUTRAL
0.25” FASTON
TAB
Term. 1: +Vout
Term. 2: -Vout
PIN 1) +12V fan RTN
PIN 2) +12V fan
Pin 9) DC OK
Pin 10) +5Vsb RTN
Mating Connector:
Molex 09-50-3031
Pins: 08-52-0072
Mating Connector: Mating Connector:
Mating Connector:
Molex 22-01-3027
Pins: 08-50-0114
Mating Connector:
Molex 90119-0010 or
Pins: 90119-2110
Molex 01-
90020001
Molex 19141-
0058/0063/0083
AMP 87977-3
Pins: 87309-8
www.slpower.com
CINT1275 REV 1.2 15-JAN-13
3
SLPOWER [ SL Power Electronics ]
