STK14CA8
Rev
2.0
Date
Change
January 2008
page 3: added thermal characteristics.
page 5: in the SRAM Read Cycles #1 and #2 table, revised parameter
t
t
t
description for
and
and changed Symbol #2 to
for
ELQX
EHQZ
ELEH
Read Cycle Time; updated SRAM Read Cycle #2 timing diagram and
changed title to add G controlled.
page 8: revised the notes below the Software-Controlled Store/Recall
Cycle diagram.
page 10: in the Mode Selection table, changed column to A -A . In the
16
0
values in this column, added a zero after each instance of “0x.” On fifth
row, changed AutoStore Enable value to 0x04B46.
page 11: under AutoStore Operation, revised text to read: “Refer to the
DC CHARACTERISTICS table for the size of the capacitor.”
page 12: under Hardware Store (HSB) Operation, revised first para-
graph to read “The HSB pin has a very resistive pullup...”
page 13: added best practices section.
page 16: added access times column to the Ordering Codes.
2.1
January 2008
Corrected pin assignments in package drawings on page 2.
SIMTEK STK14CA8 Datasheet, January 2008
Copyright 2008, Simtek Corporation. All rights reserved.
This datasheet may only be printed for the expressed use of Simtek Customers. No part of the datasheet may be reproduced in any other
form or means without the express written permission from Simtek Corporation. The information contained in this publication is believed to be
accurate, but changes may be made without notice. Simtek does not assume responsibility for, or grant or imply any warranty, including
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE regarding this information, the product or its use. Nothing herein consti-
tutes a license, grant or transfer of any rights to any Simtek patent, copyright, trademark, or other proprietary right.
Rev 2.1
Document Control #ML0022
Jan, 2008
21
SIMTEK [ SIMTEK CORPORATION ]
