SiI3114 PCI to Serial ATA Controller
Data Sheet
Overview
The Silicon Image SiI3114 is a single-chip solution for a PCI to Serial ATA controller. It accepts host commands
through the PCI bus, processes them, and transfers data between the host and Serial ATA devices. It can be used
to control four independent Serial ATA channels. Each channel has its own Serial ATA bus and will support one
Serial ATA device. The SiI3114 supports a 32-bit 66 MHz PCI bus and the Serial ATA Generation 1 transfer rate of
1.5 Gbit/s (150 MB/s).
Key Benefits
The Silicon Image SiI3114 PCI to Serial ATA Controller is the perfect single-chip solution for designs that need to
accommodate storage peripherals with the new Serial ATA interface. Any system with a PCI bus interface can
simply add the Serial ATA interface by adding a card with the SiI3114 and loading the driver into the system.
The SiI3114 comes complete with drivers for Windows 98, Windows Millennium, Windows NT 4.0, Windows
2000, XP, Windows 2003, Netware 5.1, 6.0, 6.5, Red Hat Linux 8.0, 9.0, SuSE Linux 8.1, 8.2 and United Linux
1.0.
Features
Overall Features
• Standalone PCI to Serial ATA host controller chip
• Compliant with PCI Specification, revision 2.3.
• Compliant with Programming Interface for Bus Master IDE Controller, revision 1.0.
• Driver support for Windows 98, Windows Millennium, Windows NT 4.0, Windows 2000, XP, Windows 2003,
Netware 5.1, 6.0, 6.5, Red Hat Linux 8.0, 9.0, SuSE Linux 8.1, 8.2 and United Linux 1.0
• Supports up to 4Mbit external Flash or EPROM for BIOS expansion.
• Supports an external EEPROM, flash, or EPROM for programmable device ID, subsystem vendor ID,
subsystem product ID, and PCI sub-class code.
• Supports the Silicon Image specific driver for special chip functions.
• Fabricated in a 0.18μ CMOS process with a 1.8 volt core and 3.3 volt I/Os.
• Supports Plug and Play.
• Supports ATAPI device
• Supports Activity LEDs, one for each channel with 12mA open drain driving capability.
• Available in a 176-pin TQFP package.
PCI Features
• Supports 66 MHz PCI with 32-bit data.
• Supports PCI PERR and SERR reporting.
• Supports PCI bus master operations: Memory Read, Memory Read Multiple, and Memory Write.
• Supports PCI bus target operations: Configuration Read, Configuration Write, I/O Read, I/O Write, Memory
Read, Memory Write, Memory Read Line (Memory Read) and Memory Read Multiple (Memory Read)
• Supports byte alignment for odd-byte PCI address access.
• Supports jumper configurable PCI class code.
• Supports programmable and EEPROM, Flash and EPROM loadable PCI class code.
• Supports Base Address Register 5 in memory space.
Serial ATA Features
• Integrated Serial ATA Link and PHY logic
• Compliant with Serial ATA 1.0 specifications
• Supports four independent Serial ATA channels.
• Supports Serial ATA Generation 1 transfer rate of 1.5Gbit/s.
• Supports Spread Spectrum in receiver
• Single PLL architecture, 1 PLL for all four ports
• Programmable drive strengths for Backplane applications
© 2007 Silicon Image, Inc.
SiI-DS-0103-D
SILICONIMAGE [ Silicon image ]
