Si823x
9. Ordering Guide
The ordering part number (OPN) naming convention is described in Figure 45. The currently available OPNs are
listed in Table 18. The part number convention is not intended to imply that all possible device configuration options
and their corresponding ordering part numbers (OPN) will be available or are included in the ordering guide table.
However, if there is a specific device configuration of interest that is currently not listed in the ordering guide table,
contact your local Silicon Labs sales representative, or go to the Silicon Labs Technical Support web page at
https://www.silabs.com/support/pages/contacttechnicalsupport.aspx and register to submit a request for your
specific device configuration and OPN. Ordering part number options for 10 V and 12.5 V UVLO will be made
available only by request.
Si823YUV-R-TPn
ISOdriver Product
Peak Output Current (0,1,2=0.5A, 3,4,5=4A)
UVLO* level (A=5V, B=8V, C=10V, D=12.5V)
Insulation Rating (A=1.5kV,B=2.5kV,C=3.75kV,D=5kV)
Product Revision
Temp Range (I=-40 to +125C)
Package Type (S=SOIC, M=LGA)
Package Extension (1=Narrow Body)
Note: UVLO = Under Voltage Lock Out for VDDA, VDDB.
Figure 45. ISODriver OPN Naming Convention
Rev. 0.3
37
SILICON [ SILICON ]
