EFR32MG13 Mighty Gecko Multi-Protocol Wireless SoC Family Data Sheet
Typical Connection Diagrams
5. Typical Connection Diagrams
5.1 Power
Typical power supply connections for direct supply, without using the internal DC-DC converter, are shown in the following figure.
VDD
Main
Supply
+
–
VREGVDD
AVDD
IOVDD
VREGSW
HFXTAL_N
HFXTAL_P
LFXTAL_N
LFXTAL_P
VREGVSS
DVDD
DECOUPLE
RFVDD
PAVDD
Figure 5.1. EFR32MG13 Typical Application Circuit: Direct Supply Configuration without DC-DC converter
Typical power supply circuits using the internal DC-DC converter are shown below. The MCU operates from the DC-DC converter sup-
ply. For low RF transmit power applications less than 13dBm, the RF PA may be supplied by the DC-DC converter. For OPNs support-
ing high power RF transmission, the RF PA must be directly supplied by VDD for RF transmit power greater than 13 dBm.
VDD
Main
Supply
+
–
VREGVDD
AVDD
IOVDD
VDCDC
VREGSW
HFXTAL_N
HFXTAL_P
LFXTAL_N
LFXTAL_P
VREGVSS
DVDD
DECOUPLE
RFVDD
PAVDD
Figure 5.2. EFR32MG13 Typical Application Circuit: Configuration with DC-DC converter (PAVDD from VDCDC)
silabs.com | Building a more connected world.
Rev. 1.4 | 123
SILICON [ SILICON ]
