欢迎访问ic37.com |
会员登录 免费注册
发布采购

SE103 参数 Datasheet PDF下载

SE103图片预览
型号: SE103
PDF下载: 下载PDF文件 查看货源
内容描述: LightCharger⑩ 2.5 Gb / s的互阻放大器决赛 [LightCharger⑩ 2.5 Gb/s Transimpedance Amplifier Final]
分类和应用: 放大器
文件页数/大小: 9 页 / 104 K
品牌: SIGE [ SIGE SEMICONDUCTOR, INC. ]
 浏览型号SE103的Datasheet PDF文件第2页浏览型号SE103的Datasheet PDF文件第3页浏览型号SE103的Datasheet PDF文件第4页浏览型号SE103的Datasheet PDF文件第5页浏览型号SE103的Datasheet PDF文件第6页浏览型号SE103的Datasheet PDF文件第7页浏览型号SE103的Datasheet PDF文件第8页浏览型号SE103的Datasheet PDF文件第9页  
SE1030W
LightCharger
2.5 Gb/s Transimpedance Amplifier
Final
Applications
§
§
§
§
§
SONET/SDH-based transmission systems, test
equipment and modules
OC-48 fibre optic modules and line termination
ATM optical receivers
Gigabit Ethernet
Fibre Channel
Product Description
SiGe Semiconductor offers a portfolio of optical
networking ICs for use in high-performance optical
transmitter and receiver functions, from 155 Mb/s up
to 12.5 Gb/s.
SiGe Semiconductor’s SE1030W is a fully integrated,
silicon bipolar transimpedance amplifier; providing
wideband, low noise preamplification of signal current
from a photodetector. It features differential outputs,
and incorporates an automatic gain control
mechanism to increase dynamic range, allowing input
signals up to 2.6 mA peak. A decoupling capacitor on
the supply is the only external circuitry required. A
system block diagram is shown after the functional
description, on page 3.
Noise performance is optimized for 2.5 Gb/s
operation, with a calculated rms noise based
-10
sensitivity of –26 dBm for 10 bit error rate, achieved
using a detector with 0.5 pF capacitance and a
responsivity of 0.9 A/W, with an infinite extinction ratio
source.
Features
§
§
§
§
Single +3.3 V power supply
Input noise current = 360 nA rms when used with
a 0.5 pF detector
Transimpedance gain = 2.3 kΩ into a 50
load
(differential)
On-chip automatic gain control gives input
current overload of 2.6 mA pk and max output
voltage swing of 300 mV pk-pk
Differential 50
outputs
Bandwidth (-3 dB) = 2.4 GHz
Wide data rate range = 50 Mb/s to 2.5 Gb/s
Constant photodiode reverse bias voltage = 1.5 V
(anode to input, cathode to VCC)
Minimal external components, supply decoupling
only
Operating junction temperature range = -40°C to
+125°C
Equivalent to Nortel Networks AB89-A2A
§
§
§
§
§
§
§
Ordering Information
Type
SE1030W
Package
Bare Die
Remark
Shipped in
Waffle Pack
Functional Block Diagram
SE1030
TzAmp
2.5 Gb/s
Automatic Gain Control
Integrator
VCC or +ve supply
Rectifier
Input
Current
TZ_IN
Rf
Tz Amp
Output
Driver
50
50
OUTP
OUTN
Bandgap
Reference
43-DST-01
§
Rev 1.5
§
May 24/02
1 of 9