GM5BW96385A
■ Taping Specifications
1. Leader tape standard: JIS C0806
Fig. 11 Leader Tape
Pull out
Beginning
End
Empty
Stuffed
Leader (Empty)
40 mm MIN.
400 mm MIN.
GM5BW96385A-11
2. Cover tape peel resistance: F = 0.1 to 1.0 N (θ = 10° or less). See Fig. 10.
Fig. 12 Tape Separation
F
Cover tape
θ = 0 ~ 10°
Tape speed: 5 mm/s
Forward
Carrier tape
GM5BW96385A-12
3. Tape bending resistance: Cover tape will remain in place on radii of 30 mm or more. Under 30 mm radii,
the cover may separate.
4. Joints are not allowed in the cover tape.
5. Parts are packed with an average quantity of 2000 pieces per reel.
6. Product mass: 30 mg (approximately)
7. Sharp guarantees the following:
a. No contiguous empty spaces in the tape
b. Missing parts will not make up more than 0.1% of the total quantity.
c. Parts will be easily removed from the tape.
8. Parts will not stick to the cover tape as it is peeled.
Sheet No.: DG-0089001
10