Model No. GM2BB**QT1C
“Contents in this technical document be changed without any notice due to the product modification.”
http://www.sharp-world.com/products/device/
6-4．Packing
6-4-1．Moisture proof packing
In order to avoid the absorption of humidity while transport and storage,
the devices are packed in moisture proof aluminum bags.
SHIPMENTꢀTABLE
PART No. GM2BB□□QT1C
Aluminum bag
Label
QUANTITY. 2000
RANK ○△△-□
LOT No.
XXXXXXXXXXX
SHARP CORPORATION
MADE IN XXXX
(※１)
R.C.
Silica gel
SHARP LABEL
Label(EIAJ C-3 compliant)
Reel
(Note 1) This mark indicates that this product is RoHS compliant product designed and
manufactured in accordance with Sharp's Green Device Guidelines.
6-4-2．Recommended storage conditions
Temperature: 5℃to 30 ℃ Relative humidity: 85% or less
6-4-3．Precautions after opening aluminum bags
①Please be sure to give them the soldering within 7 days under the following
conditions. Temperature: 5 ℃to 30 ℃ Relative humidity: 60% or less
②Storage in a dry box is recommended in case that the products are not used for
a long time after opened. Or repack the reels with a desiccative by the sealer
and store them under the same conditions mentioned in 5.3.2.
③Please perform the baking treatment under the recommended conditions in the
following cases;
・ The blue indicator of silica gel changes its color or fades.
・ 7days passed after opened under the specified storage conditions.
・ Products were stored out of storage condition.
(Recommended baking conditions）
・ Products with taping
ꢀTemperature: 60 ℃to 65 ℃, Time: 36 to 48 hours
・ Single piece of the products (on PCB or metallic tray)
ꢀTemperature: 100 ℃to 120 ℃, Time: 2 to 3 hours.
ꢀAvoid piling up the reels or applying stress to them during baking so as to protect from
ꢀdeformation. Please be sure to cool them to room temperature after baking.
15
sharp LD-E7-1-14-A
SHARP [ SHARP ELECTRIONIC COMPONENTS ]
