8. Precaution for Use
1.
Storage
To avoid absorption of moisture, it is recommended to store parts in a dry box (or desiccator)
with a desiccant. Otherwise, storage in the following environment is recommended.
Temperature : 5℃~30℃ Humidity : 60%HR max.
2.
3.
4.
5.
Parts stored more than one week after opening or if desiccant indicator shower color changes,
it is highly recommended that LED’s should be baked for 10~ 12 hours at 60˚C±5˚C
LEDs must be stored at clean atmosphere. If the LEDs are stored for 3 months or more after
shipment from SSC, storage in a sealed container with a nitrogen is recomented.
If the LED is considered to be wet, it is highly recommended that the LED should be dried for
100Hr at 80±5℃ or 12Hr at 100±5℃.
Any mechanical force or excess vibration should be avoided during temperature cooling
process to normal temperature after reflow
6.
7.
8.
Rapid cooling should be avoided
LED should not be placed on a flexible area of the PCB
This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA should be used.
9.
When the LED is operating in DC mode, the driving current should be determined after
considering the thermal properties of the application and maximum ambient temperature
requirements
10.
Damage prevention from ESD or Surge.
1.
It is highly recommended to use the wrist-band or anti electrostatic gloves when
handling the LED’s
2.
All devices, equipments and machines mush be properly grounded
Rev. 00
September 2009
www.acriche.com
SEOUL [ Seoul Semiconductor ]
