SA9603C
Dump register values: The content of the individual registers are transmitted
sequentially, at the 'Dump' command. Transmission of the first register value will
start with the completion of the current measurement cycle (Maximum 8 mains
cycles). The sequence of the registers is always as follows: Mains voltage, mains
frequency, reactive energy register followed by the active energy register value. By
specifying the register in the DUMP command, register values are transmitted
starting with the specified register and stopping with the active energy register.
Commands for the active energy integrator
RD
RD
RES
RES
RES
RD
RD/
RES
DUMP
DUMP
START
BIT
STOP
BIT
D R -00832
Commands for the reactive energy integrator
RD
RD
RES
RES
RD
RES
RD/
RES
DUM P
DUM P
START
BIT
STOP
BIT
DR- 008 33
Commands for the frequency register
RD
RD
DUMP
DR-00834
DUMP
START
BIT
STOP
BIT
8/18
sa m e s