RT5715
Ordering Information
RT5715
Package Type
QW : WDFN-8SL 2x2 (W-Type)
(Exposed Pad-Option 2)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Note :
Richtek products are :
�½
Pin Configuration
(TOP VIEW)
EN
PGND
AGND
FB
1
2
3
4
8
7
6
5
9
VIN
LX
PGOOD
VOS
WDFN-8SL 2x2
Marking Information
3Z : Product Code
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
3ZW
W : Date Code
�½
Suitable for use in SnPb or Pb-free soldering processes.
Functional Pin Description
Pin No.
1
Pin Name
EN
Pin Function
Enable control input. Connect this pin to logic high can enable the device and
connect this pin to GND can disable the device.
Power ground. The exposed pad must be soldered to a large PCB and connected
to PGND for maximum power dissipation.
Analog ground. Should be electrically connected to GND close to the device.
Feedback voltage input. Connect this pin to the midpoint of the external feedback
resistive divider to set the output voltage of the converter to the desired regulation
level. The device regulates the FB voltage at Feedback Reference Voltage,
typically 0.45V.
Output voltage sense pin for the internal control loop. Must be connected to
output.
Power good open-drain output. This pin is pulled to low if the output voltage is
below regulation limits. Can be left floating if not used.
Switch node. The Source of the internal high-side power MOSFET, and Drain of
the internal low-side (synchronous) rectifier MOSFET.
Power input supply voltage, 2.5V to 5.5V.
2,
PGND
9 (Exposed Pad)
3
4
AGND
FB
5
6
7
8
VOS
PGOOD
LX
VIN
Copyright
©
2019 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
www.richtek.com
2
PGND
DS5715-02
November 2019