RT1710S
Functional Block Diagram
SCL
SDA
I2C Controller
MTP
DG0
DG1
Internal Bus
Cable Policy
Engine
MUX Control
Register Block
Protocol Layer
Detection
Voltage
Regulator
VCON1
RA
GND
RA
USB PD Physical
Layer
VCON2
CCIN
Operation
SOP’ Communication is recognized by electronics in
one Cable Plug (which may be attached to either the
UFP or DFP). SOP Communication between the Port
Partners is not recognized by the Cable Plug. the term
Cable Plug in the SOP’ Communication case is used to
represent a logical entity (RT1710S) in the cable which
is capable of PD Communication.
Both SOP Communication and SOP’ Communication
take place over a single wire (CC pin). For a product
which does not recognize SOP’ Packets, this will look
like a non-idle channel.
Copyright © 2017 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS1710S-00
February 2017
www.richtek.com
3