RT1710S
Cable ID for USB Type-C Cables
General Description
The RT1710S is a Type-C cable ID for active and
passive cables. All USB Full-Featured Type-C cables
shall be electronically marked. Electronically marked
cables shall support USB Power Delivery Structured
VDM Discover Identity command directed to SOP’. This
provides a method to determine the characteristics of
the cable, e.g. its current carrying capability, its
performance, vendor identification, etc. This may be
referred to as the USB Type-C Cable ID function.
The RT1710S is available in a WDFN-8L 2x2 package.
Features
Support SOP’ Communication
Integrated Transceiver (BMC PHY)
Embedded Both Side RA Resistor
Embedded Both Side ISO Diode
Embedded MTP
Support Multi-Time Writable Memory to Store
VDM Data
Support 4V to 5.5V Operation on VCON1/VCON2
Pin
Built-in Slew Rate Control for BMC Signal to
Reduce the Effect of EMI
Support Custom Structured VDM Writing
Through CC Pin
Support I
2
C Bus for Programming VDM Data
8-Lead WDFN Package
Ordering Information
RT1710S
Package Type
QW : WDFN-8L 2x2 (W-Type)
Lead Plating System
G : Green (Halogen Free and Pb Free)
Note :
Richtek products are :
Applications
USB Full-Featured Type-C Cables
Pin Configuration
(TOP VIEW)
VCON2
GND
SCL
SDA
1
2
3
4
8
7
6
5
RoHS compliant and compatible with the current
GND
requirements of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering
processes.
9
VCON1
CCIN
NC(DG0)
NC(DG1)
Marking Information
42W
42 : Product Code
W : Date Code
WDFN-8L 2x2
Copyright © 2017 Richtek Technology Corporation. All rights reserved.
is a registered trademark of Richtek Technology Corporation.
DS1710S-00
February 2017
www.richtek.com
1