ZULU Telemetry
Pairing Process
In order to pair together a Transmitter and receiver,
1.
2.
On the Receiver Briefly press the Receiver ‘Sync Button’
Briefly operate any of the transmitter buttons
For all other operation please refer to the ZULU Module operation
Analogue in / PWM Out
When using the analogue RF link, by turning the potentiometer VR1 or VR2, outputs 1 and 2
at the receiver will vary between 0 and 100% PWM, the EVAL-T board has these outpus con-
nected to LED’s 1 and 2 which will ‘dim’ their brightness with the adjustment of the transmit-
ter VR1 and 2
.
Serial Data Output
The ZULUEVAL-T Receiver board provides a serial data output on both the RS232 and USB
outputs each time a valid datapacket is received. The serial data output is to the following
configuration
Baud Rate:
Data bits:
Stop Bits:
Parity:
19200
8
1
none
RTS/CTS
Handshaking:
DS-ZULUT-1