ZULU Telemetry
ZuluT Evaluation Board Configuration
Overview
When paired together the outputs of the receiver will follow the inputs at the transmitter
The serial outputs also provide data from the receiver
To get up an running complete the following;
1.
Set the jumper links as below
2.
Screw in Antenna
3.
Apply power
4.
Pair together the receiver and transmitter board
Jumper Links
Reference
J3
J3
J4
J4
(Transmitter)
J4
(Receiver)
LK1-LK4
LK5
(Receiver)
Name
A/D
Channel Select
TX/ RX Select
Watchdog
Enable
PWM
Enable
Comms
Select
PWM Supply
Note that the Jumper links are read on Power up only
Pr
im
el
I/O 1 & 2 are
analogue operation
Zulu operates on Channel A
Zulu set as Transmitter
Watchdog enabled
Enables PWM Output
All links from Centre to USB
All links from Centre to RS232
Vcc: PWM is powered from Vcc
VSUPPLY: PWM is powered
from incoming V supply at TB1
in
When Fitted
y
ar
When Open
I/O 1 & 2 are set to
Digital operation
ta
Da
Zulu operates on Channel B
Zulu set as Receiver
Watchdog Disabled
Output’s 1& 2 set to
Digital
N/A
DS-ZULUT-1
RFSOLUTIONS [ RFSOLUTIONS.LTD ]
