THREE-PHASE WAVEFORM MODE
10.2 Block description
10.2 Block description
Figure 10.2.1 shows the block diagram of the three-phase waveform mode, and explanation of registers
relevant to the three-phase waveform mode is described below.
The following registers are common to the pulse output port mode and three-phase waveform mode:
• Waveform output mode register (address A616
)
• Three-phase output data register 0 (address A816
• Three-phase output data register 1 (address A916
)
)
When using the three-phase waveform mode, be sure to fix the waveform output select bits (bits 2 through
0 at address A616) to “100 ,” and then, set the relevant registers.
When not using the pulse output port mode and three-phase waveform mode, be sure to fix the waveform
output select bits (bits 2 through 0 at address A616) to “000 .”
2
2
D
Fig. 10.2.1 Block diagram of three-phase waveform mode
7906 Group User’s Manual Rev.2.0
10-4
RENESAS [ RENESAS TECHNOLOGY CORP ]
