M16C/6KA Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Description
Description
REJ03B0100-0100Z
Rev.1.00
Jul 16, 2004
The M16C/6KA group of single-chip microcomputers are built using the high-performance silicon gate
CMOS process using a M16C/60 Series CPU core and are packaged in a 144-pin plastic molded QFP.
These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruc-
tion efficiency. To communicate with host CPU, the LPC bus interface is built in. In this way, this MCU can
work as slave controller in the personal computer system.
Features
• Memory capacity ........................................ ROM 128K bytes
RAM 5K bytes
• The Min. time of instruction execution ....... 62.5ns (f(X
IN
)=16MHz, with 0 wait, Vcc=3.3V)
• Supply voltage ........................................... 3.0 to 3.6V (f(X
IN
)=16MH
Z
with 0 wait)
• Supply voltage for Program/Erase ............. 3.0 to 3.6V
(CPU reprogram mode 0, Internal clock=8MH
Z
with 1 wait)
(CPU reprogram mode 1, Internal clock=4MH
Z
with 1 wait)
• Low power consumption ............................ 52.8mW ( f(X
IN
)=16MH
Z
, with 0 wait, V
CC
= 3.3V)
• Interrupts .................................................... 32 internal and 16 external interrupt sources, 4 software
interrupt sources; 7 levels (including key input interrupt)
• Key input interrupts ...................................... 2 (8 inputs shared with 1 interrupt request X 1;
8 inputs (with event latch) shared with1 interrupt request X 1)
• Multifunction 16-bit timer ............................ 5 output timers + 6 input timers
• Serial I/O (Serial interface) ........................ 3 channels (1 for UART or clock synchronous, 2 for clock synchronous)
• Host interface ............................................. LPC bus interface X 4
• A-D converter (A/D converter) ................... 10 bits X 8 channels (Expandable up to 10 channels)
• PWM .......................................................... 8 bits X 6 channels
• Watchdog timer .......................................... 1
• I
2
C bus interface ........................................ 3 channels
• PS/2 interface ............................................ 3 channels
• Serial interrupt output ................................ 6 factors (2 fixed factors, 4 programmable factors)
• Programmable I/O ..................................... 129
_______
• Input port .................................................... 1 (P8
5
shared with NMI pin)
• Clock generating circuit ............................. 1 built-in clock generation circuit
(built-in feedback resistor, and external ceramic)
Applications
Notebook PC, others
Specifications written in this manual
are believed to be accurate, but are
not guaranteed to be entirely free of
error.
Specifications in this data sheet may
be changed for functional or perfor-
mance improvements. Please make
sure your manual is the latest edition.
Rev.1.00 Jul 16, 2004
REJ03B0100-0100Z
page 1 of 266
RENESAS [ RENESAS TECHNOLOGY CORP ]
