POWERLINE
RP12-S_DA
Series
DC/DC-Converter
Notes :
1. The RP12 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under
no-load condition will not damage these devices, however they may not meet all listed specification.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12uH. 12uH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control pin voltage is referenced to negative input.
8. See application notes for EMI-filtering.
Package Style and Pinning (mm)
DIP24 Package Style
3rd angle
projection
31.80
20.30
15.20
10.20
3.8
5.10
2
Pin Connections
20.30
Pin #
1
2
Single
ON/OFF
-Vin
Dual
ON/OFF
-Vin
3
-Vin
-Vin
9
NC
Com
11
14
16
22
23
NC
-Vout
+Vout
Com
+Vin
+Vin
0.25 x 0.50
Rectangular Pin
+Vout
-Vout
+Vin
+Vin
9
11
14
1
2 3
NC = No Connection
Bottom View
Pin Pitch Tolerance 0.35 mm
23 22
16
April-2005
www.recom-international.com
219
RECOM [ RECOM INTERNATIONAL POWER ]
