MIL-M-38510/131A
NOTES:
1. Resistors are ±1% and capacitors are ±10% unless otherwise specified.
2. Precaution should be taken to prevent damage to the D.U.T. during insertion into the socket and in
applying power.
3. Selection circuitry for dual devices is not shown.
4. Settling time, as measured on pin 5, is defined as the interval of time during which the summing
node is not nulled.
5. R1 = R2 = 604 Ω and C = 22 pF.
C
6. Device type 01 only.
7. C includes scope, probe, and jig capacitance.
L
FIGURE 5. Test circuit for settling time.
13