MIL-M-38510/112B
1.3 Absolute maximum ratings.
Positive supply voltage ..................................................................... 36 V
Total supply voltage .......................................................................... 36 V or
±18
V
Output voltage .................................................................................. 36 V
Input voltage range ........................................................................... -0.3 V to +36 V 2/
Differential input voltage ................................................................... 36 V
Sink current ....................................................................................... 20 mA (approximately)
Output short circuit to ground ............................................................ Continuous 3/
Storage temperature range ............................................................... -65°C to +150°C
Junction temperature (T
J
) ................................................................. +175°C 4/
Lead temperature (soldering, 60 s) .................................................. +300°C.
1.4 Recommended operating conditions.
Supply voltage (V
CC
) ........................................................................ 5 V dc to 30 V dc
Operating temperature range ............................................................ -55°C to +125°C
1.5 Power and thermal characteristics.
Case outline
Package
Maximum allowable
power dissipation
350 mW @ T
A
= 125°C
400 mW @ T
A
= 125°C
330 mW @ T
A
= 125°C
90 mW @ T
A
= 125°C
maximum
θ
J-C
60°C/W
35°C/W
40°C/W
55°C/W
maximum
θ
J-A
140°C/W
120°C/W
150°C/W
121°C/W
A, D
C, P
G
2
14-lead FP
Dual-in-line
8-lead can
20-terminal
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this specification. This
section does not include documents cited in other sections of this specification or recommended for additional
information or as examples. While every effort has been made to ensure the completeness of this list, document
users are cautioned that they must meet all specified requirements of documents cited in sections 3, 4, or 5 of this
specification, whether or not they are listed.
2.1 Government documents.
2.1.1 Specifications, standards, and handbooks. The following specifications and standards form a part of this
specification to the extent specified herein. Unless otherwise specified, the issues of these documents are those
cited in the solicitation or contract.
______
2/ The input voltage should be within the common mode range to insure a proper output state.
3/
4/
No protection exists for short circuits to the positive supply.
For short term test (in the specific burn-in and life test configuration when required and up to 168 hours
maximum) T
J
= 275°C.
2