lQ
QT1100A-ISG
10 K
EY
QT
OUCH
™ S
ENSOR
IC
A
DVANCED
I
NFORMATION
10 independent touch sensing fields
100% autocal for life - no adjustments required
SPI and UART serial interfaces
Scanport output - simulates a membrane keypad
Simple external per channel passive circuit
User-defined setups of operating parameters
3.3V~5.0V single supply operation
AKS™ Adjacent Key Suppression for tight key layouts
Sleep mode for low power operation
Spread spectrum modulated bursts - superior noise rejection
Sync pin for superior mains frequency noise rejection
FMEA compliant design features - self detects faults
Lower per key cost than many mechanical switches
Lead-free package
APPLICATIONS
PC peripherals
Television controls
Instrument panels
Appliance controls
Pointing devices
Gaming machines
Actual Size
QT1100A charge-transfer (“QT”) QTouch ICs are self-contained digital controllers capable of detecting near-proximity or touch on up to
10 electrodes. This device allows each electrode to project an independent sense field through glass or plastic. These devices require
only a few inexpensive passive components per sensing channel. The devices are designed specifically for human interfaces, such as
control panels, appliances, gaming devices, lighting controls, or anywhere a mechanical switch may be found.
Each key channel operates independently, and can be tuned to a unique sensitivity level by simply changing setup values in an
EEPROM or via a serial interface. An external EEPROM can store the setups permanently for standalone applications, for example
when using the scanport, or, the EEPROM can be omitted if the serial port is used to send setup information after each power-up.
Included is patent pending AKS™ Adjacent Key Suppression which suppresses touch from weakly responding keys and allows only a
dominant key to detect, to solve the problem of large fingers on tightly spaced keys. Modulated burst technology provides superior
noise rejection. ‘Fast-DI’ operation works to further suppress false activations due to noise.
These devices also have a Sync pin to suppress some forms of external interference. A Sleep mode is also available for very low
power standby operation.
The QT1100A is designed specifically to assist in creating FMEA compliant designs, allowing it to be used in applications such as
appliance controls.
Using the charge transfer principle, these devices deliver a level of performance which is clearly superior to older technologies yet
extremely cost-effective.
T
A
-40ºC to +85ºC
AVAILABLE OPTIONS
SSOP-48
QT1100A-ISG
1
LEAD-FREE
Yes
LQ
Copyright © 2003-2005 QRG Ltd
QT1100A-ISG R3.02/1105
QUANTUM [ QUANTUM RESEARCH GROUP ]
