PE42851
Product Specification
Figure 27. Tape and Reel Drawing
Tape Feed Direction
Notes: 1. 10 sprocket hole pitch cumulative tolerance ±0.02
2. Camber not to exceed 1 mm in 100 mm
3. Material: PS + C
4. Ao and Bo measured as indicated
5. Ko measured from a plane on the inside bottom of the
pocket to the top surface of the carrier
6. Pocket position relative to sprocket hole measured as
true position of pocket, not pocket hole
Ao = 5.25 mm
Bo = 5.25 mm
Ko = 1.1 mm
Pin 1
Top of
Device
Device Orientation in Tape
Table 7. Ordering Information
Order Code
PE42851MLBA-X
PE42851MLBA-Z
EK42851-03
Description
PE42851 SP5T RF switch
PE42851 SP5T RF switch
PE42851 Evaluation kit
Package
Green 32-lead 5x5 mm QFN
Green 32-lead 5x5 mm QFN
Evaluation kit
Shipping Method
500 units / T&R
3000 units / T&R
1 / Box
Sales Contact and Information
For sales and contact information please visit
www.psemi.com.
Advance Information:
The product is in a formative or design stage. The datasheet contains design target
specifications for product development. Specifications and features may change in any manner without notice.
Preliminary Specification:
The datasheet contains preliminary data. Additional data may be added at a later
date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best
possible product.
Product Specification:
The datasheet contains final data. In the event Peregrine decides to
change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer
Notification Form).
The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use
of this information. Use shall be entirely at the user’s own risk.
No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant,
or in other applications intended to support or sustain life, or in any application in which the failure of the
Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no
liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE
are trademarks of Peregrine Semiconductor Corp. Peregrine products are protected under one or more of
the following U.S. Patents:
http://patents.psemi.com.
©2012-2013 Peregrine Semiconductor Corp. All rights reserved.
Page 12 of 12
Document No. DOC-13014-3
│
UltraCMOS
®
RFIC Solutions
PSEMI [ Peregrine Semiconductor ]
