LinkSwitch-HP
eSIP-7C (E Package)
C
2
0.403 (10.24)
0.397 (10.08)
0.264 (6.70)
Ref.
0.081 (2.06)
0.077 (1.96)
A
B
Detail A
2
0.290 (7.37)
Ref.
0.325 (8.25)
0.320 (8.13)
0.198 (5.04) Ref.
0.519 (13.18)
Ref.
0.207 (5.26)
0.187 (4.75)
Pin #1
I.D.
0.016 (0.41)
Ref.
0.140 (3.56)
0.120 (3.05)
3
4
0.047 (1.19)
0.118 (3.00)
SIDE VIEW
0.070 (1.78) Ref.
0.033 (0.84)
0.028 (0.71)
0.010 M 0.25 M C A B
6×
0.100 (2.54)
0.050 (1.27)
0.016 (0.41)
0.011 (0.28)
3
6×
0.020 M 0.51 M C
FRONT VIEW
BACK VIEW
0.100 (2.54)
10° Ref.
All Around
0.050 (1.27)
0.050 (1.27)
0.020 (0.50)
0.060 (1.52)
Ref.
0.021 (0.53)
0.019 (0.48)
PIN 1
0.048 (1.22)
0.046 (1.17)
0.019 (0.48) Ref.
0.155 (3.93)
0.059 (1.50)
0.378 (9.60)
Ref.
0.023 (0.58)
0.027 (0.70)
PIN 7
END VIEW
0.059 (1.50)
Notes:
DETAIL A
1. Dimensioning and tolerancing per ASME Y14.5M-1994.
0.100 (2.54)
0.100 (2.54)
2. Dimensions noted are determined at the outermost
extremes of the plastic body exclusive of mold flash,
tie bar burrs, gate burrs, and interlead flash, but including
any mismatch between the top and bottom of the plastic
body. Maximum mold protrusion is 0.007 [0.18] per side.
MOUNTING HOLE PATTERN
(not to scale)
3. Dimensions noted are inclusive of plating thickness.
4. Does not include inter-lead flash or protrusions.
5. Controlling dimensions in inches (mm).
PI-4917-061510
20
Rev. E 06/15
www.power.com