Released
PMC-Sierra, Inc.
PM9311/2/3/5 ETT1™ CHIP SET
Data Sheet
PMC-2000164
ISSUE 3
ENHANCED TT1™ SWITCH FABRIC
2.3.2.13 8B/10B Decoder Enable
Symbol: DDECEN
Address Offset: 00090h
Default Value: 00000000h
Access:
Read/Write
Enables the 8B/10B Decoder.
Bits
Description
31:1
Reserved.
8B/10B Decoder Enable. This bit enables the 8B/10B decoder logic for the fiber optics
receiver. If the 8B/10B decoder is disabled, no synchronization is locked onto and therefore the
fiber optics ready status is not asserted, and no tokens/cells are pushed into the token/input
fifos. It is generally a good idea to program the 8B/10B decoder lookup table before the 8B/10B
decoder is enabled.
0
2.3.2.14 VCSEL Laser Reset (Active-Low)
Symbol: DLSRRS
Address Offset: 00094h
Default Value: 00000000h
Access:
Read/Write
Drive the active-low reset line on the Siemens PAROLI VCSEL laser array.
NOTE: This is a general output pin and may be used for other purposes.
Bits
Description
31-1 Reserved.
VCSEL Laser Reset (Active-Low). This bit can be used to drive the active-low reset line on
the VCSEL laser array. It defaults to a low level at power-up and reset time which causes the
laser array to be switched off.
0
128
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE