PM7384 FREEDM-84P672
DATA SHEET
PMC-1990445
ISSUE 5
FRAME ENGINE AND DATA LINK MANAGER 84P672
CRC[1]
CRC[0]
Operation
Reserved
1
1
INVERT:
The HDLC data inversion bit (INVERT) configures the HDLC processor to
logically invert the incoming HDLC stream from the RCAS672 before
processing it. The value of INVERT to be written to the channel provision
RAM, in an indirect channel write operation, must be set up in this register
before triggering the write. When INVERT is set to one, the HDLC stream is
logically inverted before processing. When INVERT is set to zero, the HDLC
stream is not inverted before processing. INVERT reflects the value written
until the completion of a subsequent indirect channel read operation.
PRIORITY:
The channel FIFO priority bit (PRIORITY) informs the partial packet
processor that the channel has precedence over other channels when being
serviced by the RMAC672 block for transfer to the PCI host. The value of
PRIORITY to be written to the channel provision RAM, in an indirect channel
write operation, must be set up in this register before triggering the write.
Channel FIFOs with PRIORITY set to one are serviced by the RMAC672
before channel FIFOs with PRIORITY set to zero. Channels with an HDLC
data rate to FIFO size ratio that is significantly higher than other channels
should have PRIORITY set to one. PRIORITY reflects the value written until
the completion of a subsequent indirect channel read operation.
7BIT:
The 7BIT enable bit (7BIT) configures the HDLC processor to ignore the least
significant bit of each octet in the incoming channel stream. The value of
7BIT to be written to the channel provision RAM, in an indirect channel write
operation, must be set up in this register before triggering the write. When
7BIT is set high, the least significant bit (last bit of each octet received), is
ignored. When 7BIT is set low, the entire receive data stream is processed.
7BIT reflects the value written until the completion of a subsequent indirect
channel read operation.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
151
PMC [ PMC-SIERRA, INC ]
