RELEASED
PM7350 S/UNI-DUPLEX
DATA SHEET
PMC-1980581
ISSUE 5
DUAL SERIAL LINK PHY MULTIPLEXER
Register 0x2D: Microprocessor Cell Data
Bit
Type
Function
Default
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
MCDAT[7]
MCDAT[6]
MCDAT[5]
MCDAT[4]
MCDAT[3]
MCDAT[2]
MCDAT[1]
MCDAT[0]
X
X
X
X
X
X
X
X
MCDAT[7:0]:
The MCDAT[7:0] is used to write to the Insert FIFO or read from the selected
Extract FIFO by the microprocessor.
When inserting cells, the Insert FIFO Ready register may be polled to
determine whether the FIFO is ready to receive a cell. Alternately, an
interrupt may be generated by setting the Insert FIFO Interrupt Enable
register bit accordingly. A cell is transferred to the Insert FIFO by performing
successive write accesses to the Microprocessor Cell Data register. The
rising edge of WRB for two successive write accesses to this register must
separated by at least three REFCLK periods.
When extracting cells, the Extract FIFO Ready register may be polled to
determine which FIFO has a cell available to be read. Alternately, an
interrupt may be generated by setting the Extract FIFO Interrupt Enable
register bit accordingly. Selection of the Extract FIFO is done by writing the
EXTFSEL bit of the Extract FIFO Control register. A cell is transferred from an
Extract FIFO by performing successive read accesses to the Microprocessor
Cell Data register. The falling edge of RDB for two successive read accesses
to this register must separated by at least three REFCLK periods.
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
130
PMC [ PMC-SIERRA, INC ]
