欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM73487 参数 Datasheet PDF下载

PM73487图片预览
型号: PM73487
PDF下载: 下载PDF文件 查看货源
内容描述: 622 Mbps的ATM流量管理设备 [622 Mbps ATM Traffic Management Device]
分类和应用: 异步传输模式ATM
文件页数/大小: 251 页 / 2936 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM73487的Datasheet PDF文件第131页浏览型号PM73487的Datasheet PDF文件第132页浏览型号PM73487的Datasheet PDF文件第133页浏览型号PM73487的Datasheet PDF文件第134页浏览型号PM73487的Datasheet PDF文件第136页浏览型号PM73487的Datasheet PDF文件第137页浏览型号PM73487的Datasheet PDF文件第138页浏览型号PM73487的Datasheet PDF文件第139页  
Released  
Datasheet  
PM73487 QRT  
PMC-Sierra, Inc.  
PMC-980618  
Issue 3  
622 Mbps ATM Traffic Management Device  
7.2.17 RX_QUEUE_ENGINE_TEST  
Address: 28h (A0h byte)  
Type: Read/Write  
Function: The bits in this register disable individual functions within the queue engine  
for system debug purposes.  
Each instance of the “B” process (the UTOPIA receive Buffering process) performs the VPI/VCI map-  
ping of a new cell from the UTOPIA interface to a receive CCB channel number.  
The “U” process (the UTOPIA enqueue process) uses the receive CCB channel number from the “B”  
process and peforms the cell enqueue function, including any congestion control.  
The “S” process (the receive switch fabric cell Sending process) fetches a cell for switch fabric  
dequeue.  
The “P” process (the receive switch fabric acknowledge Post-processing process) analyzes the ACK  
response from the previous cell transmission.  
Reset Value: 0  
Format: Refer to the following table.  
Field (Bits)  
Description  
RESERVED  
(31:27)  
Write with 0 to maintain future software compatibility.  
RX_4_RR_PTRS  
(26)  
1
Use 4 separate sets of round robin pointers, one set for each S process.  
Use this to achieve more predictable multicast performance when the bit  
SEPARATE_OUT_MC is set. This also allows more effective timeslot  
entries to be used when SEPARATE_OUT_MC is cleared. This setting  
can only be used when AL_RAM_CONFIG is not equal to 0.  
Use 1 set of round robin pointers.  
0
RX_STATS  
(25)  
1
0
Enable the storage of RX_CH_STATS in the ABRAM  
Disable the storage of RX_CH_STATS in the ABRAM. Use this setting  
when only 64K x 16 of memory is present or if the RX_CH_STATS are  
not needed.  
RX_LONG_SVC_TBL  
(24)  
1
0
Use 511 entry long RX_SERVICE_TABLE. This allows finer control of  
the bandwidth. This setting can only be used when AL_RAM_CONFIG  
is not equal to 0.  
Use 127 entry long RX_SERVICE_TABLE.  
RESERVED  
(23)  
Write with 0 to maintain future software compatibility.  
RX_SCG_ENABLE  
(22)  
1
Enforce the Service Class Group congestion limits configured in  
RX_LWRxx_MAX_QD and RX_LWRxx_EXP_CONG_QD. Note:  
When this feature is enabled, the maximum queue depth for any of the  
three service class groups is 31K cells.  
0
1
Ignore the configured SCG congestion limits  
RX_RED_ENABLE  
(21)  
Enable Random Early packet Discard function. The  
RX_xxx_EXP_CONG_QD that is used for each of the CH, SC, SCG,  
and DIR settings is randomly chosen to be the user configured one or the  
value one codepoint below the configured value.  
RED disabled  
0
123