S/UNI®-JET Data Sheet
Released
Figure 36 Receive Unipolar J2 Stream
RCLK
e
e
INFO X
INFO N INFO N+1 INFO N+2 INFO N+3 INFO N+4 INFO N+5 INFO N+6
LCV INDICATION
INFO X+1
1
2
RDATI
RLCV
The Receive Unipolar J2 Stream diagram (Figure 36) shows the unipolar J2 receive signal on the
RDATI input. LCV indications, detected by an upstream B8ZS decoder, are indicated on input
RLCV. RLCV is sampled each bit period. The PMON LCV Event Counter is incremented each
time a logic one is sampled on RLCV.
Figure 37 Generic Receive Stream
RCLK
Overhead Overhead Overhead Overhead Overhead Overhead Overhead Overhead
INFO 1 INFO 2
INFO 3 INFO 4
INFO 5
RDATI
ROHM
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
The generic receive stream diagram (Figure 37) illustrates how ROHM is used to mark the
location of the transmission system overhead bits in the RDATI stream. RDATI and ROHM are
both sampled on the rising edge of RCLK.
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-1990267, Issue 3
298