欢迎访问ic37.com |
会员登录 免费注册
发布采购

PM7344 参数 Datasheet PDF下载

PM7344图片预览
型号: PM7344
PDF下载: 下载PDF文件 查看货源
内容描述: SATURN QUAD T1 / E1 MULTI -PHY用户网络接口设备 [SATURN QUAD T1/E1 MULTI-PHY USER NETWORK INTERFACE DEVICE]
分类和应用: 网络接口
文件页数/大小: 293 页 / 1101 K
品牌: PMC [ PMC-SIERRA, INC ]
 浏览型号PM7344的Datasheet PDF文件第59页浏览型号PM7344的Datasheet PDF文件第60页浏览型号PM7344的Datasheet PDF文件第61页浏览型号PM7344的Datasheet PDF文件第62页浏览型号PM7344的Datasheet PDF文件第64页浏览型号PM7344的Datasheet PDF文件第65页浏览型号PM7344的Datasheet PDF文件第66页浏览型号PM7344的Datasheet PDF文件第67页  
PM7344 S/UNI-MPH  
DATA SHEET  
PMC-950449  
ISSUE 6  
MULTI-PHY USER NETWORK INTERFACE  
On end of message, the Status Register also indicates the FCS status and the  
number of valid bits in the final data byte. Interrupts are generated when one,  
two or three bytes (programmable via the RFDL configuration register) are stored  
in the FIFO buffer. Interrupts are also generated when the terminating flag  
sequence, abort sequence, or FIFO buffer overrun are detected.  
When the internal HDLC receiver is disabled, the serial data extracted by the  
FRMR block is output on the RDLSIG[x] pin updated on the falling clock edge  
output on the RDLCLK[x] pin.  
9.9  
T1/E1 Framing Insertions (TRAN)  
The Basic Transmitter function is provided by the TRAN block. The TRAN block  
inserts the T1-SF or T1-ESF framing for the 1.544 Mbit/s data stream or the E1  
basic framing and CRC multiframe for the 2.048 Mbit/s data stream.  
A data link is provided for T1- ESF and E1 framing formats. The TRAN  
interfaces to the XFDL and XBOC blocks to provide a variety of data link sources  
including bit oriented codes (T1-ESF format only) and LAPD messages. Support  
is provided for the transmission of framed or unframed inband code sequences  
(T1 format only) and transmission of AIS or yellow CFA signals for all formats.  
The line code of the transmit data stream may be selected to be one of AMI,  
B8ZS, or HDB3.  
9.10 T1 Inband Loopback Code Generator (XIBC)  
The Inband Loopback Code Generator function is provided by the XIBC block.  
This block generates a stream of inband loopback codes to be inserted into a T1  
data stream. The stream consists of continuous repetitions of a specific code  
and can be either framed or unframed. When the XIBC is enabled to generate a  
framed stream, the framing bit overwrites the inband code pattern. The contents  
of the code and its length are programmable from 3 to 8 bits. The XIBC  
interfaces directly to the TRAN Basic Transmitter block.  
9.11 T1 Pulse Density Enforcer (XPDE)  
The Pulse Density Enforcer function is provided by the XPDE block. Pulse  
density enforcement is enabled by a register bit within the XPDE.  
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE  
47