PM7344 S/UNI-MPH
DATA SHEET
PMC-950449
ISSUE 6
MULTI-PHY USER NETWORK INTERFACE
Figure 21
- J2 (6.312 Mbit/s) Receive Interface
RSC
RSD
JT2F
Outputs
RCG
RTS
RCLKI[x]
RDD[x]
S/UNI-MPH
Inputs
ROH[x]
The S/UNI-MPH is configured to select the J2 receive interface. The
connections between the two devices should be made as shown in the
"OPERATIONS - Using the JT2F" section. The register bits RDNINV and RFALL
are set to logic 1 so that ROH[x] is active low and so RDD[x] and ROH[x] are
sampled on the falling edge of RCLKI[x].
Figure 22
- Direct-PHY Selection Transmit Cell Interface (MPHEN = 0)
…
TFCLK
…
…
…
TSOC
TCA[x]
TWRENB[x]
TDAT[7:0]
TXPRTY
H1
H2
H3
…
…
P43 P44 P45
P46 P47
48
H1
XX
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
227